MRS01 Series - Molded Dry Reed Switch
1. Features
- Pequeño interruptor de un solo contacto
- High insulation resistance, up to 10⁹ Ω
- Adecuado para funcionamiento de baja potencia
- Adecuado para embalaje en cinta o carrete
- Diseño personalizado disponible
- Conforming to RoHS directive
2. Performance Data
| Parámetro | Units | Valor |
|---|---|---|
| Modelo | / | MRS01-□ |
| Rated Power (max.) | W | 10 |
| Switching Voltage (Max DC/Peak AC) | V | 200 |
| Switching Current (Max DC/Peak AC) | A | 0.4 |
| Carry Current (max.) | A | 0.5 |
| Contact Resistance (@0.5V & 50mA) | mΩ | 150 |
| Tensión de ruptura | VDC | 250 |
| Insulation Resistance (Rh <45%, 100V Test Voltage) | Ω | 10⁹ |
| Operating Time (max.) | ms | 0.6 |
| Release Time (max.) | ms | 0.1 |
| Capacitancia (típ.) | pF | 0.2 |
| Resistencia a las vibraciones | G | 20 |
| Shock Resistance (11ms, 1/2 sine wave) | G | 30 |
| Temperatura de funcionamiento | °C | -40 ~ +130 |
| Storage Temperature | °C | -50 ~ +130 |
3. Example of Order Marking
MRS01 - □ - □ (XXX)
| Position | Description | Options |
| ---------- | ------------- | --------- |
|---|---|---|
| ① | Product model | MRS01 |
| ② | Magnetic sensitivity (AT) | A: 05-10; B: 10-15; C: 15-20; D: 20-25; E: 25-30; F: 30-35; G: 35-40 |
| ③ | PIN mode | 0: Original reed straight pin 1: Flat straight pin 2: Flat and curved SMD pins 3: J-pin |
| ④ | Special code | Customer special requirement |
4. Outline Drawing
Pin Configurations
1) Original Reed Straight Pin
Standard straight pin configuration for through-hole mounting.
2) Flat Straight Pin
Flattened pin design for improved PCB contact.
3) SMD Pin
Surface mount device configuration with flat and curved pins for automated assembly.
4) J-Pin
J-shaped pin configuration for enhanced mechanical stability.
5. Layout
Standard PCB footprint layout for MRS01 series switches.
6. Precautions for Use
1. Medio ambiente: Avoid installation in areas directly exposed to rain, strong magnetic fields, or near objects with thermal radiation.
2. Density: Avoid excessive bulk density in use, which may affect the electrical characteristics of the switch.
3. Mechanical Shock: Excessive mechanical shock strength may change its magnetic sensitivity or even damage the switch.
4. Soldering: Use appropriate pin tightening or heat dissipation to prevent mechanical or thermal stress during welding.
5. Welding Parameters: The maximum welding temperature is 260°C and the time is less than 5 seconds.
Soporte técnico
For specific parameters and performance details, please refer to the specifications and samples provided by SHR AUTOSENSOR TECH LIMITED.
Performance parameters vary from application area to application area. Customers should choose the appropriate product according to the specific conditions of use.
Información de contacto:
SHR AUTOSENSOR TECH LIMITED
📧 Correo electrónico: [email protected]
🌐 Website: www.reed-relay.com
Disclaimer
This document is for customer reference only. Specifications and parameters may be changed due to product improvement without further notice.
*Document Version: 2.0*
*© 2026 SHR AUTOSENSOR TECH LIMITED. All rights reserved.*